Stedi
Stedi Rally Bar | Suits Ford Ranger
sku: RALLY-FORD-RNG
description
delivery
review
description
Stedi Rally Bar Light Mount | Suits Ford Ranger
To suit all Ford Ranger PX2, PX3, Raptor, and Everest vehicles.
LIKE A WELL TAILORED SUIT.
The STEDI Rally Bar is designed for a seamless fully reversible and non-intrusive install (grill dependent). The inner support system is connected to the existing fasteners behind the grill, without the need for any holes. Once installed, you can expect a higher mounting position than the factory counterpart and the optimal setup for a killer lighting combination. With slick styling and the perfect compatibility for the STEDI product range, our Rally Bar will seamlessly uphold your expectations while loudly showcasing the quintessential quality of STEDI.
SPOTLIGHTS, AERIAL OR LIGHT BAR.
The STEDI Rally Bar is a perfect match for our 60-66mm Hex Brackets. The Hex is designed to reduce excessive mounting equipment, and when combined with the Rally Bar, provides the perfect solution for hosting your ideal light combination.
THE NITTY
GRITTY.
The nudge bar re-imagined.
This simple bracket for your Ford Ranger is the perfect solution to mount a set of driving lights without compromising your Ranger, Everest, or Raptor's original look. It was designed so that it can be installed with no modifications necessary to the vehicle, and it's much lighter than a nudge bar or bull bar.
The STEDI Rally Bar is a perfect match for our 60-66mm Hex Brackets. The Hex is designed to reduce excessive mounting equipment, and when combined with the Rally Bar, provides the perfect solution for hosting your ideal light combination.
The STEDI Rally Bar has been designed to comply with all relevant ADR's.
To suit all Ford Ranger PX2, PX3, Raptor, and Everest vehicles.
TECH SPECS
HOLDING CAPACITY | 30kg |
MATERIAL | Stainless steel (front tube) |
THICKNESS | 2mm |
DIAMETER | 60mm |
PRODUCT WEIGHT | 5.1kg |
SHIPPING WEIGHT | 6.3kg |
WHAT'S INCLUDED
- 1 x LHS Vertical Support
- 1 x RHS Vertical Support
- 1 x Lower Radiator Support Bracket
- 1 x Upper Boomerang Support Bracket
- 1 x LHS Projection bracket
- 1 x RHS Projection bracket
- 1 x 60mm Rally bar tube
- 4 x M8 Hex Head 20mm Bolts
- 14 x M8 Allen Head 20mm Bolts
- 4 x M6 Allen Head 18mm Bolts
- 36 x M8 Flat Washers
- 18 x M8 Nyloc Nuts
- 4 x M6 Nyloc Nuts
delivery
-
SHIPPING POLICY
- Shipping is available within Australia only. No international delivery.
- If all items in your order are in stock, they will be dispatched witthin 2-3 busniess days.
- We Don't ship to P.O. boxes.
- Delivery times vary based on location. Please allow 2-14 business days for delivery.
-
Click & Collect is available at no additional charge from our Sydney and Brisbane warehouses.
-
Shipping Damage: Unless you opt for delivery insurance, we are not responsible for any damage caused during shipping.
-
Failed Delivery/Pickup
If an item is returned to us due to a failed delivery attempt or because the customer did not collect it from AusPost or the depot, the customer will be responsible for covering the shipping cost for re-delivery.
Re-Delivery or Redirect Shipment
If your shipment requires re-delivery due to a failed delivery attempt or needs to be redirected to a different address after dispatch, additional shipping charges will apply.
New Charges: Any re-delivery or redirection will incur extra fees, which must be paid before the shipment is rescheduled. Charges vary based on the courier and location.
To avoid delays or extra costs, please ensure the correct address is provided at checkout and someone is available to receive the delivery.
Refund Requests: If the customer chooses to cancel the order instead of re-delivery, the original shipping charges will not be refunded. Only the product cost will be eligible for a refund.
Please ensure accurate delivery details and timely collection to avoid additional charges.
RETURNS & WARRANTY POLICY
- Professional installation is recommended. We are not responsible for any damage caused during installation and will not issue refunds for such cases.
- Return Authorization: Before returning or exchanging an item, you must contact us with the item ID and reason for return/exchange.
- Inspection on Arrival: Please inspect your order for any manufacturer defects or shipping damage upon arrival. Contact us immediately if there is an issue.
- Change of Mind Returns: We accept change of mind returns, but a 20% restocking and admin fee will be deducted from the refund.
- Return Deadline: Items must be returned within 15 days of delivery.
- Late Returns: Returns will not be accepted if you contact us after 15 days from the date of delivery.
- Minor scratches are not considered manufacturing defects.
- Return Location: All returns must be sent to our Sydney or Brisbane warehouse.
- Refund Process: Refunds will only be processed after we have received and inspected the item also to the same payment method you paid with.
- Complete Returns: Items must be returned with all accessories. If any accessories are missing or damaged during return shipping, we will deduct the cost from the refund.
- The warranty will be voided if any products are modified to fit, including cutting, grinding, shaving, screwing, or any other alterations, unless prior written or emailed approval has been obtained from Rockarmor head office
Warranty Claims & Shipping Responsibility
To start a claim, contact us at support@aussieoffroad.com.au.
-
If your Claim has been approved you must:
- Pay for shipping to send the item back to us.
- Pay for shipping when we send the replacement or repaired item back to you.
LAY-BY POLICY
- Aussie Offroad offers a 3-month lay-by on all products.
- The item must be paid in full and picked up within 3 months from the purchase date.
- If the 3-month period is exceeded, you still have the option to pay off the invoice and collect the item.
- Lay-by cancellations: If you choose to cancel your lay-by, all payments made will be non-refundable.