Front Runner
sku: KSFR002BP
FORD RANGER T6 / WILDTRAK / RAPTOR (2012-2019) SLIMSPORT ROOF RACK KIT - BY FRONT RUNNER (KSFR001BP)
description
description
FORD RANGER T6 / WILDTRAK / RAPTOR (2012-2019)
SLIMSPORT ROOF RACK KIT - BY FRONT RUNNER
Product Code KSFR002BP
It’s never been easier to start your adventure with the Ford Ranger T6 / Wildtrak / Raptor (2012-2019) Slimsport Roof Rack Kit.
This low-profile rack lets you immediately enjoy the Great Outdoors with versatile accessories so you can build your own adventure and go!
This Slimsport Roof Rack is ready to play. Upgrade to the ultimate Slimsport Rack Tray configuration at any time by adding the
RACK ACCESSORIES or exploring them later when a new adventure calls.
- This low profile flat deck Slimsport rack has a load carrying area of 1272mmL (50") x 1150mmW (45.27").
- The sleek side rails have integrated mounting feet. Mounting feet also have additional brace brackets for added strength.
- The high-strength aluminum slats have top and bottom T-slots suitable for all Front Runner top mount accessories.
- Effortlessly access your Slimsport cargo with the Handle/Light Slimsport Rack Bracket (sold separately).
- Easily add on the Slimsport Side Mount Accessory Bracket / Small – by Front Runner (sold separately) for all Front Runner side mount accessories.
- Need a lightbar? The optional Ford Ranger (2012-Current) Slimsport Rack 40" Light Bar Wind Fairing (sold separately) has a 40" cutout to allow the use of 40" LED Slim Light Bar VX1000-CB / 12V/24V / Single Mount (sold separately).
- The standard Ford Ranger (2012-Current) Slimsport Rack 40" Light Bar Wind Fairing with rubber edge trim, makes the rack ultra-quiet (sold separately).
- Fitment guide and all mounting hardware included.
- 6"/T30 Torx Allen Key for Slimsport Rack is required for installation (sold separately).
- Note: Drilling required for fitment (all hardware included). NO DRILLING REQUIRED FOR WILDTRAK MODELS
- Note: Under Rack Tables are not compatible with the Slimsport rack kit range.
- Note: Some side mount accessories are not suited for Slimsport Racks such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.
Note: This Rack kit is not suitable for the Wildtrak 2019 4th Gen 2019-Current.
KSFR001 - Ford Ranger T6 / Wildtrak / Raptor (20120-2019) Slimsport Roof Rack Kit - by Front Runner
Consisting of:
1 x Ford Ranger T6 / Wildtrak / Raptor (2012-2019) Slimsport Roof Rack Kit
Installation Hardware
Fitting Instructions
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:
Width: 325mm (13")
Length: 1700mm (67")
Height: 160mm (6")
Shipping Weight:
Weight: 32.67kg (72lbs)