null
×
close
1300 554 923

Mon - Sat 8:30am-17:00pm

Sale
sold out
contact-image.jpg

have questions?

Dual Spare Wheel carrier to suit 76/78 Series Landcruiser Wagon / Troop Carrier

(No reviews yet) Write a Review
Price: $2,300.00
Sale Price: $1,750.00
SKU:
WCFJ75
Weight:
85.00 KGS
Shipping:
Calculated at Checkout
Out of stock
5 customers are viewing this product

Dual Spare Wheel carrier to suit 76/78 Series Landcruiser Wagon / Troop Carrier

Price: $2,300.00
Sale Price: $1,750.00

Out of stock

Dual Spare Wheel carrier to suit 76/78 Series Landcruiser Wagon / Troop Carrier

Price: $2,300.00
Sale Price: $1,750.00

 

ROCKARMOR GEN III DUAL SPARE WHEEL CARRIER

Designed & tested in Australia, Rockarmor’s Gen III Dual Spare wheel carrier has been engineered to cater for the true 4wd tourer who requires the ultimate rear end storage & protection solution.

For most 4wd vehicle owners, their spare tyre will be found either on their back door or underneath the vehicle. Both of these standard locations can cause issues when traveling off-road, either due to the lack of departure clearance when your spare wheel is secured under the vehicle or due to the extreme vibrations the rear door will endure when driving over the thousands of corrugations, which can lead to damaged door hinges, when the spare wheel is secured to the door.

Replacing the factory bumper, once adapted to the vehicles chassis, the Rockarmor rear bar, gives your 4wd instant solid protection from any off-road obstacles, which is common on extreme departure manoeuvres. Manufactured from 3mm & 6mm steel, the GEN III wheel carrier will withstand Australia’s toughest terrain.

The Rear bar features two 31mm stub axles, which allow for twin universal carriers that can carry a spare wheel or a dual jerry can holder. The large 31mm stub axles are warranted to carry up to 2 x 35” tyres.

FEATURES

UNIVERSAL ARM DESIGN

The twin carriers that are provided with the rear bar, have been designed in such a way, where they can be altered to peoples different driving lifestyles. The arms can be removed at any time, so that you can either have both arms connected to the bar simultaneously, one arm only on the rear bar or have both arms off, leaving only the rear bar attached to the vehicle.

The arm’s most rewarding feature is it’s open stud pattern, which allows for multiple attachments, meaning you can carry a wheel or a dual jerry can holder on the same arm, removing the need to purchase different arms for different uses.

 

31MM STUB AXLE

The twin 31mm stub axle’s found on the rear bar, have the ability to carry an arm loaded with a 35” tyre. Welded through the bar, the stub axles have the strength to carry the heavier mud tyres with full confidence.

UNIQUE QUICK RELEASE HANDLES

Found only the Rockarmor GEN III wheel carriers is it’s unique release handles, which allow for easier & quicker opening & closing of the arms. The handle works very similar to a car door, where it features automatic double locking hatches, meaning you can open and close the arm in one motion with just one hand.

 wc805.jpg
 wc802.jpg

L.E.D LIGHTING

Due to the your spare wheels most likely covering your factory rear lights, the bar incorporates L.E.D indicator and reverse L.E.D lights, which are ADR complied.

POWDER COATED

Rockarmor’s rear bar and carriers are e-coated and then finished off with high quality powder coat, meaning the bar will survive the test of time in the harshest of Australian weather conditions.

 131023-advertiser-Rockarmor-0069-570x320.jpg
 wc807.jpg

TWIN HIGH LIFT SLOTS

Breaking down or getting stuck is very common when out in the bush. The bar has been engineered to incorporate twin High lift jack slots and withstand the stress of a jack reaching its full extent.

   

OPTIONAL ACCESSORIES

 wc8044.jpg

Optional DUAL JERRY CAN HOLDER

A dual jerry can holder can come pretty handy when traveling in outback areas where fuel & water are scarce. The Dual jerry can holder can store up to 2 x 20L cans. Locking clamps are provided with the jerry can holder, making sure your spare fuel & water is safely secured.

Optional ADJUSTABLE REAR LIGHT POLE

Good light is an absolute necessity when you are out driving or camping at night. The adjustable rear light pole secures to the rear of the wheel carrier arm and has the provision to fit a LED light. The light pole has been designed so that the lights wiring can be fed through the pole, giving you a safe and clean light solution.

 



 

  

Fitting Services available from Sydney and Brisbane stores. 

                                                            

 

 

 

We highly recommend using professional fitter to fit this product. 

 

PLEASE NOTE - FACTORY REVERSE SENSORS WILL NOT WORK CORRECTLY ONCE THE WHEEL CARRIER IS CONNECTED TO THE VEHICLE.

Depending on the type of sensors they might need to be recalibrated 

ADDITIONAL AFTERMARKET REVERSE SENSORS WHICH ARE COMPATIBLE WITH WHEEL CARRIERS WILL NEED TO BE PURCHASED IF YOU WOULD LIKE YOUR REVERSE SENSORS TO CONTINUE TO WORK. 

 

 

 

 

 

Customers Also Viewed

or make 4 interest-free payments of $437.50 AUD fortnightly with Afterpay More info